From micrometers...
...to centimeters...
...to meters
Top Solutions
Customer Area
A library of the most accurate cell models
Select a view and start exploring:
Welcome to the Batemo Cell Explorer!
Our library of the most accurate battery cell models of all different formats and chemistries.
Select a view and start exploring:
Filter
muRata
LG Chem
muRata
LG Chem
Samsung
Samsung
LG Chem
LG ChemStep 1: Your Cell Requirements
Type in your requirements and use the sliders to filter the corresponding range. Leave unknown values blank or use the Batemo Pack Designer
to identify the cell requirements for your application. Then scroll down to see the relevant cells.
Your Requirement
Enter your Target Values:
Filter
Capacity
Energy
Power
Current
Format
Ah
Wh
W
A
18650
21700
pouch
prismatic
21700
pouch
prismatic
18650
21700
21700
pouch
prismatic
prismatic
Capacity:
The capacity is measured by discharging the cell at an ambient temperature of 25°C from 100% with a constant current C/10 until the lower voltage limit is reached.
Energy:
The energy is measured by discharging the cell at an ambient temperature of 25°C from 100% with a constant current of C/10 until the lower voltage limit is reached.
Power:
The cell peak power is defined to be the power the cell can deliver for 5 minutes. Therefore, the cell is discharged from 100% SOC at an ambient temperature of 25°C with a constant current until either the lower voltage limit or the maximum surface temperature is reached after 5 minutes. For cells which reach the maximum surface temperature, the measured power is directly taken as peak power. For cells which reach the minimum voltage after 5 minutes, the measured power is multiplied by a correction factor, that estimates the power which would have heated up the cell to the maximum surface temperature within 5 minutes. The thermal boundary condition is free convection. This operation of the cell might be outside the specification of the cell manufacturer.
Current:
The cell peak current is defined to be the current the cell can deliver for 5 minutes. Therefore, the cell is discharged from 100% SOC at an ambient temperature of 25°C with a constant current until either the lower voltage limit or the maximum surface temperature is reached after 5 minutes. For cells which reach the maximum surface temperature , the measured current is directly taken as peak current. For cells which reach the minimum voltage after 5 minutes, the measured current is multiplied by a correction factor, that estimates the current which would have heated up the cell to the maximum surface temperature within 5 minutes. The thermal boundary condition is free convection. This operation of the cell might be outside the specification of the cell manufacturer.
The capacity is measured by discharging the cell at an ambient temperature of 25°C from 100% with a constant current C/10 until the lower voltage limit is reached.
Energy:
The energy is measured by discharging the cell at an ambient temperature of 25°C from 100% with a constant current of C/10 until the lower voltage limit is reached.
Power:
The cell peak power is defined to be the power the cell can deliver for 5 minutes. Therefore, the cell is discharged from 100% SOC at an ambient temperature of 25°C with a constant current until either the lower voltage limit or the maximum surface temperature is reached after 5 minutes. For cells which reach the maximum surface temperature, the measured power is directly taken as peak power. For cells which reach the minimum voltage after 5 minutes, the measured power is multiplied by a correction factor, that estimates the power which would have heated up the cell to the maximum surface temperature within 5 minutes. The thermal boundary condition is free convection. This operation of the cell might be outside the specification of the cell manufacturer.
Current:
The cell peak current is defined to be the current the cell can deliver for 5 minutes. Therefore, the cell is discharged from 100% SOC at an ambient temperature of 25°C with a constant current until either the lower voltage limit or the maximum surface temperature is reached after 5 minutes. For cells which reach the maximum surface temperature , the measured current is directly taken as peak current. For cells which reach the minimum voltage after 5 minutes, the measured current is multiplied by a correction factor, that estimates the current which would have heated up the cell to the maximum surface temperature within 5 minutes. The thermal boundary condition is free convection. This operation of the cell might be outside the specification of the cell manufacturer.
Step 2: Cells
The graph shows the cells that are relevant in your application. Hover over the circular marks to see the cell manufacturer and cell name. You can also zoom into the graph by scrolling and drag the graph where you want it. To reset the view just right click into the graph.
Format:
18650
21700
Pouch
Prismatic
We regularly post new cells to our news feed, follow us to stay informed!
Setup Graph:
Axis
Type
Please put in at least one requirement value to show an overview table of your relevant cells.
The table gives on overview of your relevant cells. Use the table to compare different cells and to get more details. Consider to go back to Step 1 to change requirements or to tighten or loosen filter settings.
Your Requirement
-- Ah
-- Wh
-- W
-- A
Is your cell missing?
No worries, let us know! We will do our best to get your cell into the Batemo Cell Explorer as soon as possible.
powered by Borlabs Cookie 